![background image](http://html.mh-extra.com/html/power-craft/4500/4500_instruction-manual_1586269020.webp)
20
General safety instructions
Please read through the accompanying booklet.
Special safety regulations for the
cordless drill and charger
In the extremely unlikely event that battery fluid
leaks out of the battery, it is extremely important
to ensure that the fluid does not come into
contact with the skin. If battery fluid does come
into contact with the skin, it must be washed off
immediately with plenty of water. If the battery
fluid comes into contact with the eyes, contact a
doctor immediately.
1. During the charging process it is important
that the charger be suitable for the battery.
2. Never allow water, moisture or damp to come
into contact with the charger.
3. The temperature must not exceed 40 ºC. Do
not cover the unit, as it may overheat.
4. Switch off the power when inserting the
battery into the charger and when there is no
battery in the charger.
5. The battery must not be burned and must not
come into contact with water.
6. Only use original batteries that are intended
for this type of machine.
7. Always keep the surfaces of the charger free
from dust and dirt.
8. Insert the battery into the charger. Remember
to check the polarity.
9. Always remove the battery before servicing the
equipment.
10. When the battery is not in the drill, the
terminals should be covered to avoid an
accidental short circuit.
11. Protect the battery from shocks and knocks.
12. The battery must not be opened.
13. The battery must not be fully discharged if it
has not been used for long periods.
Using the drill
Insert the battery at the base of the drill. The
battery is correctly positioned when the two locks
on the side of the battery click. To remove the
battery from the drill, press the two battery
release buttons (3).
1 Drill
2 Battery
3 Battery release buttons
Charging
Place the battery carefully in the charger.
Make sure that the battery is inserted correctly.
Insert the plug into the socket (up to 230 V).
When the red indicator lights up, the battery is
charging.
Charging takes approx. 1-1.5 hours.
When the green indicator lights up, the battery is
fully
charged.
Remember to first remove the plug from the
socket.
The battery can now be removed from the
charger and used.
1
2
3
ENGLISH
INSTRUCTION MANUAL
Summary of Contents for 4500
Page 28: ...28 EXPLODED VIEW PART LIST ...