![background image](http://html.mh-extra.com/html/power-craft/33331/33331_instruction-manual_1586374020.webp)
20
ENGLISH
INSTRUCTION MANUAL
Special safety regulations
•
Check that the ventilation slots are not blocked.
•
Never stop the saw blade by applying pressure to
the saw or to the side of the blade.
•
Always use the correct type of blade for the type
of work to be performed. The saw is intended for
sawing wood, particle board, fi bre board, plastic
or similar and must not
be used for anything else.
•
Never use blades that are bent or have teeth
missing.
•
Never use blades that are too large or small.
•
Never use high-speed steel blades.
•
Never use blades with a maximum RPM less than
that of the tool.
•
Check that the orientation of the blade matches
the rotation direction of the motor. The saw
blade teeth must point downwards towards the
saw table on the front of the saw.
•
Always use protective gloves when handling the
blade.
•
Never put your hand under the mitre saw or try
to remove material from the working area while
the blade is rotating.
•
Never place your fi ngers or hand on the item
being cut in front, behind or under the mitre saw
while it is running.
•
Never saw more than one item at a time.
•
Use extra supports (table, trestles or similar) for
long items so they do not tip off the workbench
when sawing.
•
Do not saw items that are so small they cannot
be safely clamped.
•
Never adjust the mitre angle or bevel angle while
the saw is running.
•
Always keep the spindle and fl anges for fi tting
saw blades clean.
•
Never use the mitre saw if the blade guard is not
working correctly.
•
The blade guard should close automatically when
the mitre saw is not in use, and must NEVER be
secured open.
•
Never allow the blade to be in contact with the
item to be cut, or other objects, when starting
the saw.
•
Check that the item does not contain nails,
screws or other objects that may damage the saw
blade.
•
The saw blades will not stop immediately when
you release the on/off button.
Preparation and adjustment
Assembly and preparation
•
Attach the mitre saw to a workbench using
assembly bolts.
•
To lift the top of the saw (4) so that it is ready
for use, you must push the top down slightly
and press the release latch down. The top of the
saw can now be lifted to the raised position and
locked in place.
Setting the mitre angle
•
Loosen the mitre adjustment screw (14), and
turn the saw table (11) to the required mitre
angle (max. 45° to the left or right).
•
The angle can be read on the graduated scale (12)
at the front of the saw table.
•
Tighten the adjustment screw and check that the
guide (10) cannot be moved.
Setting the bevel angle
•
Release the soleplate angle adjustment knob (8),
and rotate the upper part of the saw to
the desired angle (0-45° from vertical).
•
Retighten the bevel adjustment knob.
Connecting the extractor nozzle
•
Attach the hose from the extractor nozzle to
the extractor nozzle pipe (1), and ensure the
extractor nozzle is on when the saw is in use.