![background image](http://html.mh-extra.com/html/power-craft/11942/11942_instruction-manual_1586289017.webp)
17
ENGLISH
INSTRUCTION MANUAL
Sparks can occur in the motor compartment
during use. This is normal and does not mean the
grinder is defective.
Switch off the grinder after use.
Polishing
Fitting the Velcro sole and buffer pad/sandpaper
Press the spindle lock, turn the grinder upside
down and remove the outer flange using the
wrench provided.
Fit the Velcro sole on the spindle and replace the
outer flange. Fit the buffer pad or sandpaper onto
the Velcro sole.
Release the spindle lock.
Check that the Velcro sole and the accessory can
freely rotate.
Switch the grinder on using the on/off button, and
let it run for 30 seconds to check that it is
working correctly and that there are no abnormal
vibrations. Stop the grinder immediately if heavy
vibration occurs, and investigate the cause.
Use
Apply a thin layer of polish evenly over the surface
of the pad. Apply the buffer pad to the item and
start the machine. Set speed using speed selector.
Move the grinder gently along the item in figure
of 8 patterns. Give the grinder time to work. Avoid
pressing hard on the surface to be buffed. Be
thorough to achieve the best possible final result.
Switch off the grinder after use.
Cleaning and maintenance
Clean by wiping the machine exterior with a well-
wrung cloth or compressed air. Do not use water
for cleaning!
Never use corrosive or abrasive detergents, as they
may attack the plastic parts of the machine.
Environmental information
You can help protect the environment!
Follow local environmental regulations:
Dispose of unwanted electrical
equipment at an approved refuse
disposal centre.
Summary of Contents for 11942
Page 21: ...21 ILLUSTRATION ...
Page 22: ...22 PART LIST ...