Power Climber Wind BAP 360, Operation And Installation Instructions Manual

Page: 8 / 37

Reference: 38741 Issue date: 2018-JUL-24 Revision: L Page 8 of 37
Insertion of the SafeFix pin

Line the pin up with the hole, so that the slot at the base of the pin is
horizontal.

Push the pin in from outside until the spring clicks in the grooves on the shaft
of the pin. If required, rotate the pin till the slot is horizontal and the springs
are in place.

Make sure the pin is secured.
Fig 1
Removal of the SafeFix pin

Rotate the pin ¼ turn till the slot is vertical (and the springs are no
longer in the grooves) and pull the pin out.
Fig 2 Fig 3