power automation PA 8000 EL, Installation Instructions Manual, Page: 100 / 108

1. Pack the goods properly.
Controls must be packed in original or equivalent packaging.
If the packaging is not proper, Power Automation will charge
a packaging flat rate.
NOTICE!
Damages due to inadequate packaging
Inadequate packaging may result in damages to
the control unit. This will void the material war-
ranty. PA does not bear any liabilities for dam-
ages in transit.
2. Write the RMA number on the cardboard box clearly read-
able from outside.
The incoming goods department rejects all deliveries
without a visible, valid RMA number.
3. Ship the goods FREE DOMICILE / DDU. Other deliveries will
be rejected.
The goods have to arrive within 4 weeks after the date of the
approved RMA form.
9.4 Training
Having the best CNCs is one thing, to bring out the best of it is the
other.
The PA training program comprises of a number of individually
combinable training modules which offer you a well-founded knowl-
edge for using PA CNCs. At our training centers we bring your
employees - beginners and experts- up to scratch in CNC tech-
nology. We also offer individual training courses at your site. The
contents of the courses will be customized to your requirements.
For more information see
Ä
Chapter 9.1.1 “Service addresses”
on page 95 .
Return
Conditions Of Supply
Training Courses
PA 8000 EL CNC control unit
Service and return process
24.09.2015 | 100