43
6.2
Error messages
The messages that the unit can produce
Error
Details
Channel X disabled
You have attempted to access a channel that has not been configured.
Modem power up failure
The modem cannot power up. This may be because of a hardware
problem or a power supply issue. Please contact us.
No response from modem.
The modem is failing to respond properly. Please contact us.
No GPRS or SMS settings configured
The settings required for the action you are taking have not been
programmed or are incomplete.
Input not configured to phone book or bad
phone book. Cancelled.
It is unable to send an SMS to the number that you have configured.
Unable to connect to network. Check SIM
activation and Carrier Selection.
It is unable to connect to the carrier. You should check that the SIM is
activated, the network is operating normally and you have a valid
choice in ‘Carrier Selection’ selected.
Unable to send SMS, check signal
strength and SIM credit
There was an error when attempting to send an SMS. This could be a
very poor signal, a busy network, insufficient credit or the SIM may not
allow sending of SMS messages.
Unable to get GPRS context activation.
Check GPRS settings and/or try again.
It could not activate the GPRS function
– you should double check all
GPRS settings
Unable to get GPRS attach
It could not get a GPRS attach
– you should double check all GPRS
settings
Unable to connect to server, check GPRS
address
It could not contact the server you have specified. This could be down
to a server issue (not accessible) or something relating to web access
from the SIM.
Unable to connect to server, check GPRS
address and signal strength
As the above issue, except it has noticed that there is low signal
strength.
Trying to get into polling mode. Not
allowed.
Usually occurs when you attempt to go to ‘Force Transmit’, but the unit
is attempting to enter polling mode. Please wait a little while until the
‘P’ icon has a box around it before retrying.