27
The inputs tab allows each input to be configured as an analogue or digital input. Channels 5
– 9 can only be
configured as pulse or digital when there is a pulse count board plugged into the unit. For each type, the
parameters are explained on the following pages.
The common variables for each input, regardless of configuration are:
Option
What it does
Input channel name
A unique name for the channel that identifies what it connected to it, for example
‘pump house’
Input channel notes
This can be used to set any notes that may be useful for future use.
Alarm to phone book entries
These correspond to the phone numbers you can set under the
‘communications’ tab. If you tick a box, it will attempt to send a SMS message to
the phone number you have selected when it transmits.