Conectivity (Paired/Not Paired):
Displays connection status with mobile
device. To Pair a device, see section 8 Updating Your PowaKaddy.
Set Default Course
: If the Rental Cart is only intended to be used at the same
course it may be preferable to set a default course to shorten the time it takes
to start up the Rental Cart and to make the process easy for a new user.
•
Ensure Default Course is turned ON in the Admin Menu
•
From the Main Menu select Play Golf and after approximately 1 to 3
minutes the GPS will lock.
•
Select the course you want as your default course.
•
Confirm by selecting ‘Yes’, store default.
To change the default course, turn the default course selection to Off and
repeat the steps listed above. (If the Rental Cart has GPS lock, the list of 5
courses will appear removing the need to return to the main menu first).
You can turn off the default course option from the admin menu.
The default course option will only work at the selected location. If the Rental
Cart is taken to another location, the Rental Cart will ignore the default course
and display the list of five nearest golf courses at that location.
Distance:
The user can select between Yards/Miles or Metres/Km
Time adjust:
Allows the user to adjust the clock time depending on daylight
saving hours applied to your time zone.
Competition Mode (on/off):
For use in competitions where distance features
are not permitted.
User Security Pin:
Your Rental Cart can be protected by a 4 digit security pin.
This will be required on start-up to unlock the Rental Cart controls. To set:
•
Scroll to change the USER PIN to ON and press the central control dial to
select.
•
Rotate the control dial to select your 4 digit code, save each digit by
pressing the control dial.
In the event you have forgotten the code use the default factory PIN :
7921
to
unlock the controls.
Admin Pin:
Once you have set up your preferred preferences you may want
to enable the 4 digit Admin Pin to stop anyone accidently tampering with the
settings. To set:
•
Scroll to change the Admin PIN to ON and press the central control dial to
select.
•
Rotate the control dial to select your 4 digit code, save each digit by
pressing the control dial.
If the admin pin is active you will be required to enter the PIN code each time
you access the admin menu. In the event you have forgotten the code use the
default factory PIN :
1256
to unlock the Menu.
Tips (on/off):
Tips on how to advance the hole periodically during use
Demo (on/off):
Enables and disables Demo Mode from appearing in the Main
Menu.
Admin Menu Page 2
Admin Menu Page 3
User Security Pin
Admin Pin
Admin Menu Page 4
GPS Version:
GPS Firmware version installed.
Electronics Version:
Software version of the Rental Cart display and speed
controller.
Return to Main Menu
Select to return to the Main Menu. (To return to the
screen from which you entered admin menu from, hold both function buttons
for 2 seconds.)
Admin Options:
