background image

8

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments.  

Save this manual for future reference.

ATTACHMENT CLUTCH LEVER

 - Used to engage the 

mower blades, or other attachments mounted to your tractor.

ATTACHMENT LIFT LEVER

 - Used to raise, lower, and adjust 

the mower deck or other attachments mounted to your tractor.

CLUTCH/BRAKE PEDAL

 - Used for declutching and brak-

 ing the tractor and starting the engine.

MOTION CONTROL LEVER 

- Selects the speed and 

di rec tion of the tractor.

IGNITION SWITCH

 - Used for starting and stopping the 

engine. 

LIGHT SWITCH

 - Turns the headlights on and off.

Our tractors conform to the applicable safety standards of the American National Standards Institute. 

Fig. 3

PARKING BRAKE

 - Locks clutch/brake pedal into the 

brake position.

REVERSE OPERATION SYSTEM (ROS) “ON”  POSI-

TION -

 Allows operation of mower deck or other powered 

attachment while in reverse.

THROTTLE/CHOKE CONTROL

 - Used for starting and 

con trol ling engine speed.

FREEWHEEL CONTROL

 - Disengages transmission for 

pushing or slowly tow ing the trac tor with the engine off.

SERVICE REMINDER/HOUR METER

 - Indicates when 

service is required for the engine and mower.

PARKING BRAKE

PARKING BRAKE

CLUTCH/BRAKE

CLUTCH/BRAKE

PEDAL

PEDAL

THROTTLE/CHOKE

THROTTLE/CHOKE

CONTROL

CONTROL

ATTACHMENT 

ATTACHMENT 

LIFT LEVER

LIFT LEVER

IGNITION

IGNITION

SWITCH

SWITCH

ATTACHMENT 

ATTACHMENT 

CLUTCH LEVER

CLUTCH LEVER

ROS "ON" 

ROS "ON" 

POSITION

POSITION

LIGHT SWITCH

LIGHT SWITCH

SERVICE REMINDER/

HOURMETER

MOTION 

MOTION 

CONTROL 

CONTROL 

LEVER

LEVER

FREEWHEEL 

FREEWHEEL 

CONTROL

CONTROL

OPERATION

Summary of Contents for PB20H42YT

























































Reviews: