background image

3

PRODUCT SPECIFICATIONS

 Gasoline Capacity: 

3 Quarts (2.8L) 

 

 Unleaded 

Regular

 Oil (API-SG-SL): 

SAE 30 (Above 32°F/0°C) 

 (Capacity: 20 oz./0.6L) 

SAE 5w-30(Below 32°F/0°C)

 Spark Plug: 

Champion RC12YC 

(Gap:  .030"/0.76mm)

CONGRATULATIONS 

on your purchase of a new tiller. It 

has been designed, en gi neered and manu fac tured to give 

you the best pos sible de penda bil ity and per form ance.
Should you experience any prob lems you can not easily 

remedy, please contact your nearest authorized service 

center.  We have com pe tent, well-trained tech ni cians and 

the proper tools to service or repair this unit.
Please read and retain this manual. The in struc tions will 

enable you to assemble and main tain your tiller prop erly. 

Always observe the “SAFETY RULES”.

IMPORTANT:  

THIS UNIT IS EQUIPPED WITH AN INTERNAL 

COMBUSTION ENGINE AND SHOULD NOT BE USED ON 

OR NEAR ANY UNIMPROVED FOREST-COVERED, BRUSH-

COVERED OR GRASS COVERED LAND UNLESS THE 

ENGINE'S EXHAUST SYSTEM IS EQUIPPED WITH A SPARK 

ARRESTER MEETING APPLICABLE LOCAL LAWS (IF ANY).  

IF A SPARK ARRESTER IS USED, IT SHOULD BE MAINTAINED 

IN EFFECTIVE WORK ING ORDER BY THE OPERATOR.
IN THE STATE OF CALIFORNIA, A SPARK ARRESTER IS 

REQUIRED BY LAW (SECTION 4442 OF THE CALIFORNIA 

PUBLIC RESOURCES CODE).  OTHER STATES MAY HAVE 

SIMILAR LAWS.  FEDERAL LAWS APPLY ON FEDERAL LANDS.  

SEE YOUR AUTHORIZED SERVICE CENTER/DEPARTMENT  

FOR SPARK ARRESTER.

CUSTOMER RESPONSIBILITIES

•  Read and observe the safety rules.
•  Follow a regular schedule in maintaining, caring for 

and using your tiller.

• 

Follow instructions under “Maintenance” and “Stor age” 

sections of this Manual.

MAINTENANCE  ..................................................... 10-12

SERVICE & ADJUSTMENTS ................................. 12-14

STORAGE .................................................................... 15

TROUBLESHOOTING ................................................. 16

WARRANTY ................................................................. 17

SAFETY RULES ............................................................ 2

PRODUCT SPECIFICATIONS ....................................... 3

CUSTOMER RESPONSIBILITIES ................................. 3

ASSEMBLY ................................................................. 4-5

OPERATION ............................................................... 6-9

MAINTENANCE SCHEDULE ...................................... 10

TABLE OF CONTENTS

Summary of Contents for HDF800





































Reviews: