background image

9

STORAGE

When grass catcher is to be stored for a period of time, 
clean it thoroughly, remove all dirt, grass, leaves, etc. Store 
in a clean, dry place.

CAUTION:  Do not leave grass in bagger 
containers.  Empty containers after each 
use and before storing.  Failure to do so 
may result in spontaneous com bus tion 
which could develop into a fi re.

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any main-
 te nance.
•      Before each use check for loose fasteners.
•      Clean unit thoroughly after each use.

BLADE CARE

For best results mower blades must be kept sharp.  Re place 
bent or damaged blades.
•      See BLADE CARE instructions in your tractor owner's 

manual.

                    CAUTION: BEFORE PERFORMING ANY 

MAIN TE NANCE, SERVICE OR AD JUST -
MENTS:

             •      Depress  clutch  brake  pedal  fully  and 

set parking brake.

             •      Place gearshift/motion control lever in 

"NEU TRAL" position.

             •      Place clutch control in "DIS EN GAGED" 

po si tion.

             •      Turn ignition key to "OFF" position.

             •      Make sure blades and all moving parts 

have completely stopped.

             •      Disconnect  spark  plug  wire(s)  from 

spark plug(s) and place wire where it 
cannot come in contact with plug.

CAUTION:  Grass catcher components 
are subject to wear, damage and 
deterioration, which could expose 
moving parts or allow objects to be 
thrown.  Frequently check components 
and replace with manufacturer's 
recommended parts, when necessary.

CUSTOMER RESPONSIBILITIES

Summary of Contents for 532402341












Reviews: