0700_GB-scHweNkAUsLeGeR_983
- 0 -
GB
PLOUGH-TRAILING IMPLEMENTS
Extension arm with hydraulic releasing device for packer and trailing implements
From 2006 model
*)
Mounting:
1. Fit bracket (K) to mainframe
2. Pin and secure extension arm (A) to bracket (K) with pin (B)
3. Pretension draw spring (Z) (max. 4 cm.)
4. Hydraulic connection to plough turning cylinder using the T screw fitting
on the return line T or through a single action hydraulic control
115-07-01
K
A
B
Z
Adjustment:
The extension arm has 2 adjusting devices available:
1. Working settings
(hole A)
(Trailing implement position next to the plough)
The trailing implement can be led at five different
distances to the plough through
hole pattern A
Setting positions:
A1 – smallest distance
A2 – distance approx. 30 cm > A1
A3 – distance approx. 60 cm > A1
A4 – distance approx. 90 cm > A1
A5 – greatest distance
2. Latching setting
(hole A)
(Extension arm setting for latching position)
The extension arm can be set at five different latching
positions to the trailing implement through
hole
pattern B
- The extension arm projection from the tractor tyres
should be between 40 – 50 cm
- The overlap between extension arm and latching device
on the trailing implement should be between 20 – 30
cm
Note!
The trailing
implement should
run as close as
possible next to
the plough but not
collide with it.
Note!
If the latching arm
length of the
trailing implement
cannot be set
appropriately,
changing the
latching position
can compensate
this.
115-07-04
40-50 cm
20
-3
0
cm
*)
Optional extra for SERVO 25 S, SERVO 35 S, SERVO 45 S
B
A
115-07-12
1
2
3
4
5
