- 26 -
1900-EN CONDITIONER_3784
EN
ED TINE CONDITIONER
Operation mode
The aim of conditioning is to ream the wax layer (protection layer) from the blade of grass. Consequently, the fodder
looses moisture more easily and dries more quickly. Conditioning is carried out using V-shaped tines, placed in a spiral
on the conditioner shaft. The intensity is adjusted via an impact plate with conditioner rails.
Designations:
(1) Adjustable swath board
(3) Drive unit
(2) Tine rotor
(4) Intensity adjustment unit
(5) V-belt tensioner
1
4
2
3
5
Possible settings
DANGER
Life-threatening danger exists through being drawn
in by rotating parts.
t
Never open or remove the safety devices as
long as the engine is running or parts are
moving.
For optimal adaptation to the surrounding conditions, make
the following adjustments to the tine conditioner:
Set the conditioning effect:
The distance between the adjusting strip and the rotor is
set using lever (1).
- Position (3) NOVACAT 352 ED or (4) NOVACAT 402 ED:
most effective evenness. The fodder surface is strongly
reamed. However, the fodder must not be beaten.
- Position (0): the fodder surface is only lightly reamed.
NOVACAT 352 ED:
1
3
2
1 0
355-08-15