- 19 -
1900_EN_MAEHENOHNECR_3784
EN
UNHITCHING AND PARKING
General tips
DANGER
Life-threatening danger should the tractor start
moving on its own.
t
Before carrying out maintenance and repair
work, switch off the engine and remove the
key and apply the tractor's brakes.
t
Secure the machine with chocks if neces-
sary.
DANGER
Danger to life - by tilting the device
t
Make sure the machine is standing securely.
t
Park the implement only on flat, firm ground.
t
Use the support feet provided for this pur-
pose.
DANGER
Life-threatening danger exists if another person starts
up the tractor and drives away or actuates the control
lever of the hydraulic system while you are engaged
in maintenance.
t
Before carrying out maintenance and repair
work, switch off the engine and remove the
key and apply the tractor's brakes.
Unhitching implement from tractor
Depending on parking situation, mower can be unhitched
in the transport position (H) or working position (R).
H
r
The following procedure applies to both situations:
1. Set the single-action control unit to floating position to
lower the implement to the required parking position
(H, R).
2. Swivel safety flap (1) into (item A).
Pos. A
Pos. B
1
WARNING
Risk of an injury resulting in death or other serious
injury due to the failure of the safety flap (1).
t
The safety lever (1) is a safety fixture. It
should not be changed in its form and
functions.
t
The safety flap is designed in such a way
that it does not jump out of the locking posi-
tion when the cutter bar is folded up hydrau-
lically, therefore do not actuate the hydraulic
cylinder for folding up when the safety flap is
in the locking position. (Pos. A)
t
Damaged safety flaps must be replaced
immediately with new ones.
3. Extend or fold out and secure the support feet (2).
4. Lower implement onto support stands.
2