- 22 -
2000-EN INSERT 3784
OPERATION
EN
If a collision occurs anyway,
t 4UPQJNNFEJBUFMZBOETXJUDIPGGUIFESJWF
t $IFDLUIFNBDIJOFDBSFGVMMZGPSBOZEBNBHF*OQBSUJDVMBS
check the mowing discs and their drive shafts (4a).
01-00-10
4a
t *GOFDFTTBSZIBWFJUDIFDLFEPWFSJOBTQFDJBMJTUXPSL
shop also.
After contact with a foreign object
t $IFDLDPOEJUJPOPGCMBEFTBOECMBEFGJYJOH TFFDIBQUFS
"Maintenance and Service").
t 3FUJHIUFOBMMCMBEFTDSFXGJUUJOHT
5. Keep a safe distance while engine is running.
bsb 447 410
t %JSFDUQFPQMFPVUPGUIFEBOHFSBSFBBTUIFZNBZCFDPNF
injured by foreign objects ejected by the mower.
Special care is necessary on stony ground, and near
roads and paths.
6. Wear hearing protection
The noise level in the workplace can deviate from the
measured value (see Technical Data) partly because
of the differing cabin types of various tractors.
t *GBOE# "OPJTFMFWFMJTSFBDIFEPSFYDFFEFEUIFO
the farmer (or contractor) must provide appropriate
hearing protection (UVV 1.1 § 2).
t *GBOPJTFMFWFMPGE# "JTSFBDIFEPSFYDFFEFE
then hearing protection must be worn (UVV 1.1 § 16).
Mowing
1. Adjust the cutting height by turning the upper
link spindle and with the hydraulic upper link
(max. 5° inclination to mower discs)
2. To mow, slowly engage the pto outside the
mowed fodder (in field transport position) and
take the mower rotor to full speed.
Smoothly increase the p.t.o. speed, in order to avoid
noises in the free-wheel conditioned by the system.
- Adjust travel speed to terrain and crop.
Reversing
Raise the mower when reversing!
Protective covers
WARNING
Risk of injury resulting in death or other serious injury
from damaged or missing protective equipment.
t
Before starting work, make sure that the
protective device is undamaged.
t
Before starting work, make sure that the
protective device is in the working position.
The side guard and front guard can be folded up for cleaning
and maintenance work.
The two foldable guards lock mechanically in closed
condition. A tool (e.g. screwdriver) is required to open them.