- 39 -
1900-EN Maintenance_2723
EN
mAiNTENANCE
general
DANgER
Danger to life through being in the movement area
of belt units.
•
Only carry out cleaning or maintenance
work when the machine is in the lowered
working position or locked transport posi-
tion.
Raising the implement
The position (1) at which the jack may be used is indicated
by stickers on both stub axles, left and right.
1
Dealing with hydraulic lines
WARNINg
Risk of serious injury through escaping oil!
In
hydraulic systems with gas pressure accumulators,
hydraulic lines may be pressurised even though the
hydraulics have already been uncoupled.
•
Depressurise the relevant oil lines before
carrying out the maintenance!
•
Wear protective clothing!
Depressurising the hydraulic relief
1. Connect the hydraulic lines for the machine's pressure
relief.
2. Open the right side of the pressure relief and set the
control unit to the float position.
3. Check the pressure on the corresponding pressure
gauge. Operate the control unit until the pressure is
completely relieved.
4. Lock the right side of the pressure relief.
5. Repeat this process on the left side of the pressure
relief.
6. Dísconnect the hydraulic lines for the machine's pressure
relief.
gearbox
WARNINg
Risk of being burnt by hot gearbox oil or from the
hot gear housing.
•
Machine operation may cause the gearbox
housing and transmission oil to become hot.
•
Let the gearbox cool down before changing
the oil.
•
Use oil-proof gloves and protective goggles.
Oil quantity:
0.65l litre SAE 80
Oil level check:
The oil level is correct when the gear
oil reaches the inspection glass (1).
Oil change:
After the first 50 hrs,
then every 500 hrs
1
Chassis
Rigid chassis
Series: MERGENTO VT 9220
No adjustment possibilities:
