GB
HITCHING
- -
0600-GB-anBau_289
Connecting hydraulic systems to the tractor
- Only connect hydraulic system to the tractor when stopcock is
closed
(position A)
.
• Plug the connector marked with "
EW
" into the single action
servo-valve.
• Plug both connectors marked with "
DW
" into the double action
servo-valve.
Hitching
Safety hints:
see supplement-A1 points 8a. - 8h.)
- Hitching the machine to the lifting gear of the tractor.
- Fix the hydraulic lower link (U) in such a way that the machine
cannot swing out sideways.
up to 2003 model
- Raise jackstand (5b) and secure with bolt (B).
from 2004 model
- Pull jackstand (5a) to release and swing up (5b)
- Spring loaded bolt (B) locks into place automatically.
104-03-02
eW
DW
GW
WW
eL
WW= Wide-angle joint
Release rope
- Run rope (S) into tractor cabin.
Hydraulic connection
EUROTOP 771, 801, 881
There must be at least one double action and one single action
hydraulic connection available on the tractor (DW, EW).
Single action hydraulic connection:
If the tractor only has a single
action hydraulic connection, then an additional control block can
be installed (see supplement).
- This means any individual hydraulic circuit can be selected.
EUROTOP 701
There must be one single action hydraulic connection available
on the tractor (EW).
