- 15 -
0700_GB-Einkreiselbedienung_289
GB
OPeRaTION
Swathes with only one rotary unit
Caution!
Do not enter rotor
area while driving
motor is running.
Because of the double-jointed drive travelling with
only one rotary unit over swathes already made or for
reasons of space can also take place.
Variant 1 *
Hydraulic operating device preselection
Procedure:
- The rotary unit can be individually selected
- Move lever (L or R) on operating device to “ON”
- Actuate hydraulic control valve on tractor
- The rotary unit selected may only be raised to the
field transport position (FT)
- With that the drive need not be turned off
Hydraulic operating device functions:
Lever
L
= left rotary unit
Lever
R
= right rotary unit
Position
A
= Stopcock opened
Position
B
= Stopcock closed
Variant 2 *
Electrical preselection
• When individual lift is switched off actuating only one
control valve raises both rotary units
• Pressing button on operating console activates
individual lift
- Control light on operating console lights up when
individual lift is activated
- Actuate the relevant hydraulic servo-valve (ST1 or
ST2) on tractor
- The selected rotary unit is raised to the field transport
position (FT)
Note!
For this variant an additional single-action
hydraulic connection (EW) is necessary on
the tractor
There are 2 variants to activate an individual lift
151-05-03
FT
TD34/90/23
Note!
Do not raise the rotary unit beyond the field
transport position. If it is raised to the 90°
position, the joints may become damaged
during operation.
1)
Optional equipment
+
