- 9 -
0401_GB-Arbeits-Transportstellung_2611
GB
TRANSPORT AND WORKING POSITION
Safety hints:
see supplement-
A1 (points 7., 8a.
- 8h.)
• Changing
from
working position
to transport
position is only to
be carried out on
even,
fi
rm ground.
Working position
1. Stopcock opened (position E).
2. Move single action servo-valve (ST) to "lower" position
and lower rotor units to the ground.
3. Swing guard rails (6), left and right, outward
- Release lock (A)
- The locking pins catch automatically in the
fi
nal
position.
TRANSPORT AND WORKING POSITION
Transport position
Changing to Transport position
1. Use single action control valve (ST)
2. Lower machine to ground.
3. Slide trap sheet (9) completely in and
secure with T-screw (K).
4. Swing all guard rails (10) up
The locking pins catch automatically in the
fi
nal
position.
5. Detach all tine arms and put on (position 1).
Attention!
If not all tine arms are taken off, the
rotor has to be secured against turning
by means of the fork (G).
The fork (G) is
mounted on the right
guard rail.
When raising the
guard rail the fork is
swung into the shaft
of the tine arm.
6. Swing machine up into transport position (T1).
Use single action control valve (ST)
7. Close stop valves (position A)
For safety, travel on roads only with stop valves
closed!
010-04-16
1
