- 5 -
0401_GB-Anbau_293
GB
ATTACHING TO THE TRACTOR
Hydraulic connection
There must be at least one double action and one single
action hydraulic connection available on the tractor.
Connecting hydraulic system to the tractor
- Only connect hydraulic system to the tractor when
stopcock is closed (position A).
EW
Connect the plug-in connection with the ”red” dust
cap to the single action control valve.
DW
Connect both plug-in connections with the ”blue”
dust caps to the double action control valve.
A
E
TD 26/92/16
s
h
0
ST
Initial attachment to tractor
1. Attach shaft to tractor´s linkage drawbar.
Important!
- The tractor linkage drawbar must be movable (A-B)
- Left and right lifting struts (4) must be of equal
length.
2. Secure fixing bolts using linch pin (V).
3.
Fix the hydraulic lower link (5) in such a way that
the machine cannot swing out sideways.
4. Raise jackstand (10) and secure with bolt.
5. Set tractor hydraulic at correct height (H).
Ensure sufficient distance to drive shaft (X)
particularly when travelling over humps.
6. Connecting hydraulic line to tractor.
- Stopcock closed (position A)
- Connect hydraulic line (60) to tractor.
7. Lowering implement
- Stopcock opened (position E)
- Engage servo-valve (ST).
Implement is lowered slowly to the ground.
Safet hints:
see supplement-A1
points (8a. - 8i.)
DW
DW
EW
TD44/94/1
