Petaluma Wall Storage Double Door
Page
2
of
3
3. Once the toggles (b) are installed into the wall at the marked locations, reposition the wall rail (B) so that the
marked holes of the rail align with the toggles. Using the supplied toggle screw (a) secure the rail (B) to the
installed toggles (b). Note: The toggle includes a nut portion that must be “set” into a locked position prior to using
the product. This is done automatically as you rotate the toggle screw into the toggle , but keep in mind that the
screw must be rotated quite a few times before the nut finally reaches this locked position. The nut will create
resistance when it reaches the locked position within the wall.
4. Screw the wood screw(c) into the wall through the middle hole of wall rail. See
Fig. 1
HANG THE PRODUCT ONTO THE MOUNTED WALL RAIL
Fig. 1
1. On the back of your product is one affixed product-rail..
2. Carefully position the product-rail slightly above and against the wall rail, insuring that the two brackets are
aligned. Engage the two rails. See
Fig. 2
Fig. 2
