8041766
Classic Marble Top Vanity
Important Safety Instructions:
•
Please read all instructions before beginning assembly.
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
•
Keep all parts and plastic bags out of the reach of children.
•
For your safety and ease, assembly by two people is recommended.
Parts Included:
Hardware Included:
Tools Required:
(1) Vanity with
(1) Drawer
pre-installed (A)
(4) Philips Head Bolt
(2)
(2) Towel
Bar (1)
(4) Spring Washer
(3)
(1) Knob
pre-installed
(2) Extra
Knobs
(4) Flat Washer (4)
Phillips Head Screwdriver
Assembly Instructions:
1. To replace pre-assembled knob on drawer, hold knob and unscrew the bolt on backside of drawer with a screwdriver by
turning counter clockwise. Attach new knob and screw in the bolt from inside of drawer with screwdriver by turning
clockwise. (Figure1)
2. Pull the drawer out half way. Press down on the white nylon drawer stopper, which is underneath the drawer. Pull
drawer completely out of the frame. (Figure 2)
3. Align (1) towel bar (#1) to the pre-drilled holes on the side of the frame. Insert the Philips Head bolt (#2) through a
spring washer (#3) and flat washer (#4). Fasten towel bar to frame by inserting hardware into towel bar through the
underside of the frame. Repeat steps for other towel bar. (Figure 3)
4. Slide the drawer back into the frame. (Figure 4)
(1)
(2)
(3
)
