15
MIDDLE SECTION AND WING SECTION ADJUSTMENT
:
B
A
•
The height of the middle section is aligned with the height of the wing sections
by turning the piston rod of the middle cylinder (
B
).
•
When the rod screw is extended, the middle section rises. Correspondingly,
when the rod screw is retracted, the middle section lowers in relation to the
wing sections.
•
The end piece must be locked with the lock nut after adjustment.
•
No more than 15 mm of thread may be exposed.
•
Check this setting in the field before starting to harrow.
Lower the cultivator on its tines so that the mounting bolts of the cylinders
have some play. Shut down the tractor! Pay special attention when you move
between the frame of the cultivator to access the end piece to be adjusted.
Never walk or stand on the frame
!
Summary of Contents for MAGNUM PLUS 1000
