Potensic Dreamer 4K, User Manual

Page: 18 / 28

2. Return to home (RTH)
*Smart low-power RTH:
*No signal return:
*One-click return:
Click the "HOME" icon on the app to start one-click return, click the icon again to cancel.
APP control:
Figure 1
16
The smart return to home (RTH) function enables the drone to return to the last recorded take-off
point. This function shall be achieved in GPS mode.
There are three types of return to home (RTH): one-click return / smart low-power return / no signal
return.
Remote control: long press the "HOME" button on the remote control, there will be continuous "beep"
sound, and the drone will return. Long press "HOME" button again to exit RTH automatically, and
"beep" sound disappears.
Low-power alarm: when power of the drone is less than 20%, there is continuous "beep" sound from
the remote control and the battery icon on the App flashes.
Low-power return: the drone system will automatically determine whether to return according to the
distance and battery power. When the drone returns, its four footlights remain
flashing until it lands on the ground.
If the drone lose its connection to the remote control, it will automatically enter the return mode. The
drone will automatically return to the ground, If the drone and the remote control are reconnected
during return. The drone will hover at this time, and the operator can control again.
Note:
the drone does not have automatic obstacle avoidance function. If the drone crashes into
buildings or other obstacles on the way back, it will fall and break.