22
PACP-6100 Operator’s Manual -----------------------------------------------------------------
[Fig. 8 Lamp assembly]
Install the lamp securely as showen in the Fig.8
Make sure that you install it in the correct direction
Turn off power and disconnect the power code. Allow the projector to cool down for
about 5 minutes before replacing the lamp because the heated lamp may burn your
fingers.
9.2 Fuse
Replacement
1.
Turn off power, and disconnect the power cord.
2.
Pull out the plastic cover at the lower part of power socket, to replace the fuse.
Do not touch the projector with wet hands. (Risk of electric shock)
!
WARNING
!
WARNING
Summary of Contents for PACP-6100
Page 1: ......
Page 2: ... PACP 6100 Operator s Manual 1 Operator s Manual Chart Projector ...
Page 21: ...20 PACP 6100 Operator s Manual 8 Types of Chart Type C is Standard Fig 7 Types of Chart ...
Page 31: ...30 PACP 6100 Operator s Manual 4 m ...
