Post Glover PULSERPLUS PRO, Installation, Operation And Maintenance Instructions

Page: 6 / 24

PULSERPLUS PRO™ HIGH RESISTANCE GROUNDING SYSTEM
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
4750 Olympic Blvd. • Erlanger, KY 41018 • USA
Phone: 800-537-6144 / 859-283-0778 • Fax: 859-283-2978
www.postglover.com
Serving the Electrical Industry Since 1892
PGR Document #HG111-06 © 2006 Post Glover Resistors, Inc.
PULSERPLUS PRO™ HIGH RESISTANCE GROUNDING SYSTEM
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
© 2006 Post Glover Resistors, Inc. 6
Field Condition
Over-V
oltage
Over-Current
Under-V
oltage
Under-Current
2
.5 S
um
m
ar
y o
f E
ve
n
ts
Fu nd am en ta l Vo lta ge Har mo nic V olt ag e
Fu nd am en ta l Cu rre nt Har mo nic C urre nt
On Off On Off
On Off On Off
1) Display changes to Fnd Vlt
Hi Limit
2) Fundamental timer begins
and expires
3) Normal light turns of
f
4) System Normal relay
changes state
5) Ground Fault light blinks 6) Grd Fault
Alarm relay
changes state
7) Internal horn sounds 8) External Horn relay
changes state
No display or monitoring
No display or monitoring
No display or monitoring
No display or monitoring
No display or monitoring
No display or monitoring
No display or monitoring
No display or monitoring
IF
ENABLED, SET T
O 0 T
O
DISABLE. 1) Display changes to Fnd Vlt
Lo Limit
2) Fundamental timer begins
and expires
3) Normal light turns of
f
4) System Normal relay
changes state
1) Display changes to Fnd
Amp Hi Limit
2) Fundamental timer begins
and expires
3) Normal light turns of
f
4) System Normal relay
changes state
5) Ground Fault light blinks 6) Gnd Fault
Alarm relay
changes state
7) Internal horn sounds 8) External horn relay
changes state
IF
ENABLED, SET T
O 0 T
O
DISABLE. 1) Display changes to Fnd
Amp Lo Limit
2) Fundamental timer begins
and expires
3) Normal light turns of
f
4) System normal relay
changes state
IF
ENABLED, SET T
O 0 T
O
DISABLE. 1)
Display
changes
to
Hrm
Vlt
Lo Limit
2) Harmonic timer begins
and expires
3) Normal light turns of
f
4) System normal relay
changes state
IF
ENABLED, SET T
O 0 T
O
DISABLE. 1) Display changes to Hrm
Amp Lo Limit
2) Harmonic timer begins
and expires
3) Normal light turns of
f
4) System Normal relay
changes state
1) Display changes to Hrm
Vlt Hi Limit
2) Harmonic timer begins
and expires
3) Normal light turns of
f
4) System Normal relay
changes state
5)
Third Harmonic light blinks
6)
Third Harmonic relay changes state
7) Internal horn sounds 8) External Horn relay
changes state
1) Display changes to Hrm
Amp Hi Limit
2) Harmonic timer begins
and expires
3) Normal light turns of
f
4) System Normal relay
changes state
5)
Third Harmonic light blinks
6)
Third Harmonic relay changes state
7) Internal horn sounds 8) External Horn relay
changes state
Presing
Alarm Silence Button:
1)
T
urns of
f Internal horn
2) Resets External horn relay
Pressing Pulse Button:
1)
Amber light blinks
2) Pulsing relay begins
Pressing Reset Button:
1) Resets Display 2) Resets all latching relays 3) Only does above if
Auto
Reset is turned of
f
Pressing Reset and Down
Arrow Buttons:
1) Enters Setup mode