-
22
-
8 TEST
This printer has a test printing function.
In test printing, the function settings of the printer and character strings for testing are printed.
(1) Make sure that the thermal paper is set in the printer and the printer is turned off. If the thermal
paper is not set, set the thermal paper as instructed in "5 THERMAL PAPER SETTING", and turn
the printer OFF.
(2) Turn the POWER switch ON while holding down the FEED switch. Release the FEED switch after
initializing the printer (the LED lights in blue).
(3) Test printing is started.
(4) After test printing, the printer cuts the thermal paper. After (1) described below is printed, the LED
lights in white and the buzzer sounds. Determine whether or not to enter the function setting mode.
[Mode Select]
Setting Mode: Feed SW / Normal Mode: Power SW
(1)
(5) When pressing the POWER switch, (2) described below is printed, and then the LED lights in blue
and the buzzer sounds. The function setting mode is cancelled. When pressing the FEED switch,
the printer enters the function setting mode. For details, see "9 FUNCTION SETTINGS".
Normal Mode Selected
(2)
