manualshive.com logo in svg

POSMicro Datalogic PowerScan D7100, Manual

Share
Download
POSMicro Datalogic PowerScan D7100 Manual Download Page 157

Symbologies

146

PowerScan

TM

 PD7100 Corded

Add-Ons

The following features apply to optional add-ons.

Optional Add-ons

The reader can be enabled to optionally read the following add-ons (supplementals):

•

P2

•

P5

•

GS1-128

NOTE

Contact Customer Support for advanced programming of optional
and conditional add-ons.

NOTE

If a UPC/EAN base label and a an add-on are both decoded, the
reader will transmit the base label and add-on.  If a UPC/EAN base
label is decoded without an add-on, the base label will be transmitted
without an add-on. 

Conditional add-on settings (if enabled) are considered by the reader
before optional add-on settings.

ENTER/EXIT PROGRAMMING MODE

Optional Add-Ons = Disable P2

Optional Add-Ons = Enable P2

Optional Add-Ons = Disable P5

DEFAULT

DEFAULT

All manuals and user guides at all-guides.com

Summary of Contents for Datalogic PowerScan D7100










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands