manualshive.com logo in svg

POSMicro Datalogic PowerScan D7100, Manual

Share
Download
POSMicro Datalogic PowerScan D7100 Manual Download Page 104

Transmit Labels in Code 39 Format

Product Reference Guide

        

                   93

Transmit Labels in Code 39 Format

This feature enable/disables translation to Code 39 before transmitting label data to an 
IBM-46XX or a USB-OEM host. Only the symbology identifier is modified for the 
translation. The data is not converted to Code 39 or verified to be valid for Code 39.

Options are:

IBM Standard Format — 

Send labels in standard IBM format.

Code 39 Format — 

Translate the following symbologies to Code 39:

• USB-OEM: Code128, Code 93, and Codabar

• IBM-Port 5B: Code 128, Code 93, and Codabar

• IBM-Port 9B: Code 93 and Codabar

ENTER/EXIT PROGRAMMING MODE

Transmit Labels in Code 39 Format = IBM Standard Format

Transmit Labels in Code 39 Format = Code 39 Format

DEFAULT

All manuals and user guides at all-guides.com

Summary of Contents for Datalogic PowerScan D7100










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands