Page 1 of 2
Quick Installation Guide
Printer Overview
Setting up the Printer
(1) Connect the printer to the
computer mainframe.
(2) Plug the power cord into the
power jacket at the rear of the
printer.
(3) Plug the power cord into a
properly ground receptacle.
Note: Please switch OFF printer power switch prior to plug in the power cord to printer power jack.
Loading the Ribbon
(1) Place an empty paper core onto
the ribbon rewind spindle.
(2) Insert the left side first. Mount
the ribbon rewind paper core on
the front hubs.
(3) Please be noted that the bigger
hub side with 4 ribs must be
installed toward the right side of
ribbon mechanism.
(4) Install a ribbon on the ribbon
supply spindle. Mount the
ribbon
supply spindle on the rear hubs.
(5) Insert the left side first. Please
be noted that the bigger hub
side with 4 ribs must be installed
toward the right side of ribbon
mechanism.
(6) Disengage the printer carriage
by pulling the carriage release
lever upwards.
(7) Following the direction of the
↓
RIBBON
label, pull the
transparent ribbon leader to the
front from under the ribbon
mechanism.
(8) Attach the ribbon leader to the
empty paper core on the ribbon
rewind spindle (with a tape).
(9) Rotate the ribbon rewind spindle
until the ribbon overlaps the
ribbon leader and stretches
tight.
Ribbon rewind spindle
Ribbon supply spindle
Printer cover
Ribbon mechanism
Carriage release lever
Label supply spindle
Fixing tab
Print head
Label stripper
Backing paper outlet
Label roll mount
Summary of Contents for ITT4050B
Page 1: ...Label Printer ...
