
ODP 200 Technical Manual
61
[Reference]
GS
\
\
\
\
GS /
m
[Name]
Print downloaded bit image
[Format]
ASCII
GS /
m
Hex
1D
2F
m
Decimal
29
47
m
[Range]
0
≤
m
≤
3,48
≤
m
≤
51
[Description]
Prints a downloaded bit image using the mode specified by
m
.
m selects a mode from the table below:
m
Mode
Vertical Dot Density
Horizontal Dot Density
0, 48
Normal
180 DPI
180 DPI
1, 49
Double-width
180 DPI
90 DPI
2, 50
Double-height
90 DPI
180 DPI
3, 51
Quadruple
90DPI
90 DPI
[dpi : dots per 25.4 mm {1”}]
[Details]
This command is ignored if a downloaded bit image has not been defined.
In standard mode, this command is effective only when the on data exists in the print buffer.
This command is not affected by print modes (emphasized, double-strike, underline,
or character size, white/black reverse printing), except for upside down mode.
If the downloaded bit-image to be printed exceeds the printable area,
the excess data is not printed.
If the printing area width set by GS L and GS W is less than one line vertical,
the following processing is performed only on the line in question:
①
The printing area width is extended to the right up to one line in
vertical. In this case, printing does not exceed the printable area.
②
If the printing area width cannot be extended by one line in vertical,
the left margin is reduced to accommodate one line in vertical.