Positron Teleline 751109/15, Description And Installation

Page: 54 / 57

54
8-card Shelf CCC model 751109/15
3.9 Card Insertion
After all thermal considerations have been taken into account, insert the cards
into the shelf and close and secure the cover with the nuts supplied.
Once the temperature of the shelf has been calculated, the desired cards can
be inserted, and the cover replaced with the supplied nuts. For information
relevant to any of the cards, refer to their respective documentation.
³
To insert a card or cards into the shelf:
1. Push up on the yellow retaining clip slightly with one hand
2. Insert the cards with the other hand.
3. Close and secure the cover by fastening the wing nuts.
N
OTE
Q
To close the cover properly, you must first secure the bottom of
the cover before joining the holes with their respective screws.
This procedure is very important in order to prevent damage to
the cover.
N
OTE
Q
The yellow retaining clips prevent the dislodging of cards due to
vibration when the shelf is mounted near mechanical equipment
Q
Two spare yellow retaining clips have been included with the
installation kit to be used in the event that a clip becomes
unusable.
Q
To prevent minor injury to your fingers when removing a card
from the 8-card Shelf CCC model 751109/15, use your right
hand only. Push up on the yellow retaining clip with your right
thumb and then pull the card out.
D
ANGER
Q
The cover must be kept closed and secured at all times in order
to protect personnel from potentially hazardous voltages, and to
prevent damage to the cover.