Positron Teleline 751109/15 Description And Installation Download Page 4

Page: 4 / 57

8-card Shelf CCC model 751109/15

3.3 Ground Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

To connect the ground of the 8-card Shelf . . . . . . . . . . . . . . . . . . . . . . 26
Powering model 751313MC or 751318MC from an AC Source . . . . . . 29

3.4 Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Station Side Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
To install the Station side cable connections: . . . . . . . . . . . . . . . . . . . .  32
CO Side Polyethylene Insulated Cable (PIC) Connection. . . . . . . . . . .  35
To connect the CO side cable using the PIC stub  . . . . . . . . . . . . . . . .  35

3.5 Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

External Power Supply  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  38
To power the shelf via the Station cable . . . . . . . . . . . . . . . . . . . . . . . .  38
To power the shelf via the power cable   . . . . . . . . . . . . . . . . . . . . . . . .  40

3.6 Internal Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Internal Power Supplies Configurations . . . . . . . . . . . . . . . . . . . . . . . . 42
To install the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.7 Power Alarm Contact Features and Specification . . . . . . . . . . . . . . . . . . 47
3.8 Temperature Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

To calculate the temperature inside the shelf . . . . . . . . . . . . . . . . . . . . 50
To lower the temperature inside the cabinet: . . . . . . . . . . . . . . . . . . . . 51

3.9 Card Insertion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

To insert a card or cards into the shelf: . . . . . . . . . . . . . . . . . . . . . . . . 54

Appendix A – Acronyms

Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Summary of Contents for Teleline 751109/15


























































Search results

Summary of Contents for Teleline 751109/15

Reviews:

Related manuals for Teleline 751109/15

Brands by name

Popular brands

Positron Teleline 751109/15, Description And Installation

Search results

Summary of Contents for Teleline 751109/15

Reviews:

Related manuals for Teleline 751109/15

Brands by name

Popular brands