Positron 3782091C/50, User Manual

Page: 40 / 74

Using the Composite Insulator Tester & Software
34
Ensuring that the Probe has been
switched ON, select Connect to
Probe and reconnect to the pre-
selected COM port.
It is recommended to connect
the Bluetooth in the field prior
to Probe Operator climbing
the tower. Use the Send Alert
to Probe button in the field to
check the communication link.
The Probe will respond with an
annunciating tone.
With communication confirmed, the Probe Operator can now ascend the Tower. Once in position,
the Probe Operator should press the Probe’s button to ensure it is in Awake Mode. If not, the
Tablet Operator will be unable to signal the Probe Operator. Ensure that the LED of the Probe is
flashing GREEN.
After 8 minutes of no communication, the Probe will go into Sleep mode. The Tablet Operator can
keep the Probe awake by sending a download request or by pressing the Send Alert to probe
button in the Windows based Insulator Tester Software interface.