Posital Fraba KIT CONTROL BOX WITH GUI, Manual

Page: 4 / 21

Manual Kit Control Box with GUI Page 4 Version: 2020-09-10
MANUAL
KIT CONTROL BOX WITH GUI
1. Electrical Connection
The Kit Control Box can be connected to encoders of the types:
• Kit encoder with BiSS C interface (type KCD-BC0xB-1617-xxxx-xxx)
•
Kit encoder with SSI interface (type KCD-S10xB-1617-xxxx-xxx)
Please, make sure that only KIT CONTROL BOX KCB-VA produced after the 19
th
week of
2020 (on the product label indicated as 19/20) are connected to/used for configuration of
22mm ø Kit Encoders with type keys KCD-xx03B-xx17-xxxF-xxx.
1.1 Connector
Connector Type Encoder Kit Interface: BM04B-GHS-TBT (JST) / BM08B-NSHSS -TBT
Pin No. Function Remark
1 (blue) GND
3 (grey)
UART
Rx/Tx
8 (red) VCC +5V
Table 1: JST connector allocation
Connector Type Control Box Interface: D-Sub 15 pin female
Pin No. Function Remark
11 (blue) GND
10 (grey)
UART
Rx/Tx
15 (red) VCC +5V
Table 2: D-Sub 15 connector allocation