Manual Kit Control Box with GUI
Page 18
Version: 2020-09-10
MANUAL
KIT CONTROL BOX WITH GUI
Figure 20: Read Position Settings
If you are not sure about the resolution, you can also read these values.
If the radio
button “Automatic” is activated, th
e default settings are used. For entering different values, you
can activate the radio button “Manual”, enter your values
, and save these with
“Save”
button and the popup
window will close.
After pressing
“Start”
button in the main read-out window, Single Turn, Multiturn value and the whole position
word will be shown continuously. The Single Turn Value is shown in degree and digits.
