POSIFLEX WT-3007A, User Manual

Page: 12 / 16

12
Press to wakeup from Sleep mode, device will reboot after exit from Sleep
mode. And while DeepSleep mode is not enabled, scan the following setup
codes to configure idle time of Sleep mode.
0ms 500ms
3000ms 5000ms
Continuous Mode
After configuration, module starts to read without being triggered, it waits for
certain time (available to be set) to automatically start another reading while
read succeeds and output message or finish single read. Module works with the
loop if the following situation does not happen: users can single click trigger
button to pause reading. Single click the trigger button to continue with loop.
Continuous mode

Single Read Time
Under the continuous mode, the parameter means the max. length of time for
continuous reading before it succeeds. After reading succeeds or single read
timeout, the module will enter interval that it doesn’t read. The single read
range is set 0.1~25.5s, step size 0.1s; while it is set as 0, means infinite. The
default time is 5.0s.