POSIFLEX WT-3007A, User Manual, Page: 8 / 16

8
Problem Diagnostic Tips
A stray barcode is sitting somewhere in the
scanner field of view. Remove all barcode labels
from the scanner’s scan volume and try again.
Programming Codes
Below are some suggestion you need to bear in mind while scanning labels:
1. The barcode labels shown in bold are default factory settings.
2. Please cover the unwanted codes for scanning the specific barcode
required for the programming to prevent confusion in code scanning.
3. Three operational modes, Manual Mode, Continuous Mode, and Inductive
Mode , are provided to help you manage your daily activities more
efficiently via the scanner. By default, the scanner is set to Manual
Mode.
4. While scanning the setup barcode labels provided in the quick guide, you
need to pull the trigger to initiate the decoding process.
Setup Code Switch
Enable setup code functions, scan setup code to set parameters.
Enable setup code
Disable setup code
Output Content of Setup Code Switch
Do not output content of setup code Output content of setup code
Restore Factory Settings
Scan “Restore factory settings” to restore factory settings.
Restore factory settings