A - 5
TM
APP. A
STAR
…
CODES
(HEX/CONTROL) : 13 / <DC3>
FUNCTION :
Set deselect mode
DETAIL DESCRIPTION :
1.
When using serial interface printer
This function differs depending on the setting of DIP switch 4.
a)
When the DC1, DC3 invalid mode is set (DIP switches 4-1 to 4-4 are all
set to ON), the printer ignores this code.
b)
In the DC1, DC3 valid mode (with DIP switches 4-1 to 4-4 set to OFF),
data following this code is ignored when the printer receives a<DC3>
code.
The deselect mode is canceled by <DC1> code.
c)
If the printer receives a <DC3> code during an addressable mode (with
DIP switches 4-1 to 4-4 set to settings other than a) and b) above), the data
following this code is ignored.
Deselect mode can be canceled by a <DC1>
n
code.
Note
that addressable mode is valid only when the RS-422A interface
option is installed.
2.
When using parallel interface printer
Data following this code is ignored when the printer receives a <DC3> code.
The deselect mode is canceled by <DC1> code.
CODES
(HEX/CONTROL) : 14 / <DC4>
FUNCTION :
Cancel expanded character mode
DETAIL DESCRIPTION :
Cancel expanded character mode set by
<SO> code (Data following this code is printed out in normal size characters).
CODES
(HEX/CONTROL) : 18 / <CAN>
FUNCTION :
Cancel print data in buffer
DETAIL DESCRIPTION :
1.
When using serial interface printer
Clears the data buffer and the line buffer
Clears the data buffer in the STX-ETX mode, and terminates the STX-ETX
mode.
2.
When using parallel interface printer
Clears the data buffer and the line buffer
Summary of Contents for PP3000 Series
Page 1: ...TM Rev B PP3000 POS PRINTER MANUAL ...
Page 4: ......
Page 10: ......
Page 42: ...4 14 TM CHAP 4 TECHN ...
