PP2000 (E) User’s Manual
6 - 4
F.
STORE STAMP (OPTION)
Cushion width: 34.0 mm
Cushion height: 24.0 mm
Cushion thickness: 1.0 mm
Cushion material: PE foam
Stamp total width: 34.0 mm
Stamp total height: 24.0 mm (engraving included)
Stamp total thickness: 5.0 mm
Engraving width: 30.0 mm
Engraving height: 20.0 mm
Engraving thickness: 1.2 mm
Stamp material: porous rubber
Ink type: pre-inked stamp ink (has to match the material of stamp)
G.
INTERNAL SWITCHES
Dismount the 4 screws at bottom of the printer and there is a
control board fixed on a steel plate. On this control board, there is a
4PST DIP switch. The functions of each position of this DIP switch are
described below:
P1: For factory setting, should not be changed.
P2: For data preservation. ON – data in input buffer remains when
power off; OFF – data in input buffer are cleared when power
off.
P3 and P4: Setting on serial interface protocols.
P3 OFF
P4 OFF
2,400 bps N, 8, 1
P3 OFF
P4 ON
4,800 bps N, 8, 1
P3 ON
P4 OFF
9,600 bps N, 8, 1 (Default)
P3 ON
P4 ON
19,200 bps N, 8, 1
Summary of Contents for PP2000 Series
Page 1: ...Rev A PP2000 Series 2 Station Printer User s Guide ...
Page 16: ......