PP2000 (E) User’s Manual
4 - 1
IV. MAINTENANCE NOTICES
l
The printer should be put at a well ventilated site and avoid direct
sunshine, also avoid high temperature, high humidity, high
magnetic field. The site should also be free from lots of metal chips
and dust.
l
Never place any vessel for water alcohol beverages or any kind of
fluid over the printer. Otherwise it may get turned over and damage
the component inside.
l
Use only alcohol or neutral detergent for cleaning of the exterior,
please never use organic solvent like benzene or thinner.
l
Maintenance guide:
Ribbon :
Replace for a new one every three months or twenty thousand
pieces of receipt/journal printing. Please do
not
pour ink into
the ribbon or it is easy to damage the print head.
Print head:
Replace for a new one every seventy thousand pieces of
receipt/journal printing.
Store stamp:
Add ink into store stamp once every three months or twenty
thousand pieces of receipt/journal printed. To avoid illegible
stamping, please replace new store stamp once every twelve
months or eighty thousand pieces of receipt/journal printing.
Auto cutter:
Clean any paper cutting residue and dust in the auto cutting
mechanism regularly to avoid sensor malfunction and paper
jam.
²
Use of any ribbon other than the standard supply from the
manufacturer (ERC-32) or refilling of any ink to the ribbon
may cause damage like broken pin in the print head and/or
other consequences. Such damage and consequences are
responsibility of the user and are out of the warranty of the
manufacturer.
Summary of Contents for PP2000 Series
Page 1: ...Rev A PP2000 Series 2 Station Printer User s Guide ...
Page 16: ......
