6
3.
Insert the screws into the plastic anchor,
screw them in but leave them sticking out
from the wall surface to mount the printer.
4.
As shown in the figure, locate two holes on
bottom of PP-8802/8803. Then, carefully
hang the printer onto the wall using the
plastic anchors with screws.
5.
To get more detailed information of wall mounting, please refer to
relative wall mounting installation guide.
Troubleshooting Paper Jams
When it comes to the common printing problems, it is inevitable that you
might encounter the issue of paper jams at some point. The following steps are
provided to assist you in fixing the problem. Before proceeding, make sure that
your POS terminal is properly shut down.
1.
To open the paper jams rescue compartment,
place your thumbs toward the center of the
compartment and then push the cover up in
the direction shown by the arrow.
2.
In the paper jams rescue compartment, find
the adjustment wheel, which mainly allows
you to manually adjust the cutting position of
the cutter.
Adjustment wheel
