Page 19
Switch
position
ON
OFF
3
(
Refer to the setting guide made below for the details.
)
4
Reduction of line space
(
Refer to the setting guide made below for the details.
)
5
6
Reduction of line feed
(
Refer to the setting guide made below for the details.
)
7
8
(Reserved)
Users may save paper by
reduction of barcode height
of the original size.
Please refer to the following table to change the switch settings.
Effect of positions 2 and 3 on reduction of barcode height is defined as
shown below:
SW4 Pos. 2
OFF
ON
OFF
ON
SW4 Pos. 3
OFF
OFF
ON
ON
Reduction of
barcode height
Disabled
(Default)
25% reduced 50% reduced 75% reduced
Reduction of line space is designed for users to reduce the space between
every two lines in every single paragraph. For the settings of positions 4
and 5 of software switch 4, please refer to the table as shown below before
regulating the percentage of reduction of the line space.
Effect of positions 4 and 5 on reduction of line space is defined as shown
below:
SW4 Pos. 4
OFF
ON
OFF
ON
SW4 Pos. 5
OFF
OFF
ON
ON
Reduction of
line space
Disabled
(Default)
25% reduced 50% reduced 75% reduced
Reduction of line feed set through positions 6 and 7 of software switch 4
is designed for users to reduce the line feed of paper coming out of the
printer each time in three particular percentages which are 25%, 50% and
75%. Please refer to the following table to adjust switch positions 6 and 7.
Effect of positions 6 & 7 on Line Feed Reduce as shown below:
SW4 Pos. 6
OFF
ON
OFF
ON
SW4 Pos. 7
OFF
OFF
ON
ON
Reduction of line
feed
Disabled
(Default)
25% reduced 50% reduced 75% reduced
Please reboot the printer after the switch settings are done.
