Page 10
Before installing the 58mm-width paper roll,
please refer to the figure shown at the right
for mounting the spacer plate to the paper roll
compartment of the printer.
Note that the smooth side is toward the paper
roll.
Insert the noted corners of the spacer plate
into the 3 dents inside the paper roll
compartment as arrowed in numeric order.
Then the 58mm-width paper roll compartment
is formed.
58mm-width Compartment
CONFIGURATION OF LAN and Wi-Fi PRINTER
Web-based POS Printer Manager in LAN and Wi-Fi Modes
The default static IP address for the PP-6906 is 192.168.192.168 and the
default listen port is 9100. For the first time, to configure the PP-6906
through the web manager, even if your PP-6906 is a Wi-Fi model, you
must still follow the steps below:
1.
use a LAN cable of CAT 5 of a proper length to connect the LAN
connector on the printer to a LAN hub to which your desktop or
laptop PC as a host terminal is also connected;
2.
adjust the DIP switch position 2 to OFF, leaving the rest unchanged as
factory default setting;
3.
set the network segment of the host terminal to that of PP-6906,
192.168.192.XXX (1 ~ 254) except 192.168.192.168, in which the
subnet mask of host terminal is 255.255.255.0;
4.
press the power button of PP-6906 to make the printer operate;
1
1
2
3
