POSIFLEX PD-30 UE Series, User Manual

Page: 6 / 16

Page 6
order to keep the PD-320UE stable. (The screws come with PD-320UE and in
the carton.)
Picture C, the display head of PD-320UE can move as horizontal direction
t
o
the right or left, as well as front-rear adjustable degree from 15
°
or 23
°
.
Picture D,
there are two plates in the bottom of customer display which can
be used for Velcro and provides more stability without screws fixed. (The
velcro comes with PD-320UE and in the carton)
PD-310AUE for KS series
To mount the rear top mount
upgrade kit like PD-310AUE on the back of
KS series, please apply carefully 2 screws
that come along with PD-310AUE to the
back of KS series at the screw hole triangle
marked in the upper right picture. However
please do not screw them to the bottom but at a position that is about 1 turn
loose from the bottom. Similarly please loosen the screws by 1 turn for some
KS models with these 2 screws preinstalled.
For PD-310AUE fixed to KS series, please kindly follow steps below:
A) Find the lower 2 holes as indicated on the main unit.
B) Aim the 2 screws into the 2 holes above, together with PD-310AUE rear
top mount bracket numbered in inch pairs indicated below.
For host models with Gen 6 super slim base, please stick
the 2 attached cable clips at arrowed positions of Gen 6
base in the picture for cable routing when later joining the
main unit to Gen 6 base. Hook the rear bracket of the
upgrade kit onto the shoulder screws. Slide down the
upgrade kit and gently tighten the shoulder screws.
Base for KS-2010