4 - 2
as the very last step of the whole installation procedure. Connect the 2.5
φ
/5.5
φ
DC plug of the AC adapter to the 2.5
φ
/5.5
φ
DC jack inside or at bottom of the
base cabinet. The above drawing shows the example in PD2100 series. For
PD2200 series, you may now place the base on a horizontal surface and prepare
to power on. However, some mounting operations are
applicable to PD2100 series:
1. Put the metal plate back and fix the screws.
2. Mount the pole display stand plate to the
metal plate of base cabinet with screws and
mount the pole display stand plate to your
Posiflex cash drawer (CR310X or CR320X)
or on the cashier’s dash.
3. Plug the adapter into power outlet.
2. Using power from PC
for models with power kit
Install the cable
CCBLA-141 with I/O plate
in the power kit into the
hosting PC for obtaining
DC power as shown in the
left drawing. However, it is
absolutely important to
turn all the power off
before removing any case
or connecting any cable.
Followings are step-by-step
instructions for installing
this cable.
1. Make sure the PC to supply power is turned off.
2. Open the case of PC according to its relevant manual.
3. Select one I/O plate position on rear window of PC to install the I/O
plate of CCBLA-141.
4. Select one set of large 4 pin connector from the switching power
supply unit of PC and connect the male 4 pin connector of CCBLA-
141 to the connector from power supply. Connect the female 4 pin
Base cabinet
Bottom view
of cash drawer
Stand plate
I/O Plate of
CCBLA-141
Switching Power
Supply Unit
CCBLA-141
4 pin Telephone
Jack
4 pin Power
connector
Inside view of
example PC
