POSIFLEX PB-7700 Series, Technical Manual

Page: 12 / 49

PB-7700 series Technical Manual 2 - 2
SYSTEM POWER ON/OFF CONTROL
l
One main power ON/OFF push switch at front. This switch can be
programmed as “ON” only if the option power management kit is installed.
l
System can be waked up after each power off by any of the preset timer or a
remote COM port MODEM call or LAN packet
l
System can be switched off by software command through local or remote
program control if the option power management kit is installed.
l
Forced power off when switch is ON/OFF or when switch is ON only with
prolonged effort if the option power management kit is installed.
l
Power OFF to ON duration: 10 seconds min.
24VDC POWER SUPPLY
(TO POS PRINTER)
l
UPS supported (if power management kit installed)
l
24 +/- 1.2 VDC at 2 AMP load
l
Max. noise: 240 mV
l
Accessory: cable P/N: 20863014600
INPUT / OUTPUT PORTS
l
1 x mini DIN 6 pin female PS/2 KB jack
l
1 x mini DIN 6 pin female PS/2 mouse jack
l
1 x VGA display port with power support for Posiflex monitor
l
1 X parallel port
l
1 X LAN port (Ethernet 10 base T and 100 base T)
l
2 X USB ports, USB 2.0 standard
l
4 x serial communication ports. All serial communication ports can supply
DC +5V through pin 9 and COM 2/3/4 can supply DC +12V through pin 1
under overall power output limit. Default setting is standard RI and DCD
signals input at these pins for all ports.
l
1 x +24V DC jack for power support to Posiflex POS printer
l
1 x Compact Flash memory card connector (for PB7701 only)