Part 6
XT, please refer to the following installation and join the 2
nd
LCD display to
the system.
Step A):
Please locate the 4 holes on the rear side of the host system.
Step B):
Please take the 2
nd
LM LCD display, aim its 4 holes and tighten
the 4 screws to the system.
Step C):
Connect the VGA cable that has both 3 x 5 D sub male ends to VGA
port in connector area of the LCD display and the VGA port of the
host system.
Step D):
Connect the cable from power adaptor to the DC jack in connector
area of LCD display. Then insert the power adaptor to a clean power
socket and complete installation below.
LM/TM-3215/KS for KS
