5
Positioning your screen for a Perfect Viewing Angle
Tilt the screen in the direction shown by the arrow in the
figure. Please do not press on the LCD panel while
setting up the tilt angle.
Connecting VGA and USB Cables
The base stand of KS-7410/7412 features its own cable management to help
you well organize the cords. The following will provide some useful cable-
routing instructions for you to connect VGA and USB cables to KS-7410/7412.
1.
Tilt the display all the way down.
2.
To remove the cable cover at the rear of the
terminal, pull the four locking levers outwards
with your fingers and slide the cover in the
direction shown by the arrow.
3.
Tilt the screen upwards, and then pass the
necessary cables through the cable exit.
4.
Connect the connector of the power adapter to
the 12VDC-IN power jack.
5.
After tilting the screen all the way down, push
back the cable cover. Please also make sure that
cables can be routed through the cable exit.
Cable exit
