KS-6215 / KS-6215I / KS-6217 series Technical Manual 5 - 14
THE NUMERICAL KEYPAD AREA
The area with keys coded as from “1F1” to “1I4” in the programming utility
corresponds to the predefined numerical keypad in KP-300. This area is not open to the user
to reconfigure unless a specific parameter is given after the command.
select the position from the key map after the warning screen disappears. The color of
that key will change and the content entered in the editing area will be accepted for its
content to be programmed.
THE COMMAND MENU
In the command menu, there are “File”, “Keyboard”, “Edit”, “Config”, MSR”,
“About”, “Help” and “Exit”. The “File” menu can be used to open an existing template
file to be edited in this utility or to save the edited result into a template file or to exit
this utility. The “Keyboard” menu can be used to read the current content in the
programmable keypad to be edited in this utility or to write the edited result into the
programmable keypad. The “Edit” menu helps the editing operation like copy, paste or
clear the programmed content of a programmable key. Please ignore any gray
command relating to “Page” that is applicable only to other models of Posiflex
programmable keyboard and remains here only for consistency consideration. Same
comment applies to the gray “View” menu. The “Config” menu determines the keypad
beep response and the “InterCharacter Delay” of the keypad output. The “MSR” menu
in the keyboard programming utility was reserved for some earlier infrastructure and
should not be used. Please use the USB MSR Manager for MSR setup as in above
section. The “About” menu provides information of this utility itself. The “Help” menu
explains the contents in next paragraph. The “Exit” provides the termination of this
utility.
SPECIAL CONTENTS
One of the features that a Posiflex programmable keyboard / keypad outclasses
other competitors is that the contents to be programmed is not limited in those
displayable characters only. The programmable content includes those editing keys
such as arrows on a usual PC keyboard and function keys such as F1 to F12, “Shift”,
“Esc” etc. and even a programmable delay time. In the editing area, click the right
button of a mouse, a multilevel menu will appear for selection of these special contents.
Summary of Contents for Jiva KS-6215 Series
Page 16: ...KS 6215 KS 6215I KS 6217 series Technical Manual 2 4 ...
Page 36: ......
